Our 700 series technical specs are listed below. Feel free to contact our team if you’re interested in learning more about our customizable 700 series windows for your next commercial project. These windows are offered in numerous models and have been used in numerous projects all over the United States.
| Fixed | Casement | |
|---|---|---|
| Frame Depth | 3.25" | 3.25" |
| Structural Rating | Class AW-PG40 | Class AW-PG60 |
| Test Size | 1524 x 2515 (60 x 99) | 914 x 1524 (36 x 60) |
| Design Pressure ASTM E330 | 1920 Pa (40.10 PSF) | 2880 Pa (60.15 PSF) |
| Air Infiltration(ASTM E283) | <0.01 L/s/m^2 (<0.01 CFM/ft^2) 300 Pa (6.27 PSF) | 0.05 L/s/m^2 (<0.01 CFM/ft^2) 300 Pa (6.27 PSF) |
| Water Resistance (ASTM E547 and E331) | 580 Pa (12.11 PSF) | 580 Pa (12.11 PSF) |
| Uniform Load Structural (ASTM 330) | 2880 Pa (60.15 PSF) | 4320 Pa (90.23 PSF) |
| U-Factor (NFRC | 100/200) | 0.23 to 0.42 | 0.35 - 0.51 |
| CRF (NFRC | 100/200) | ||
| Forced Entry Resistance ASTM 588 | Type D Grade 10 | Type B Grade 10 |
| In-Swing Casement | Awning | |
|---|---|---|
| Frame Depth | 3.25" | 3.25" |
| Structural Rating | Class AW-PG60 | Class AW-PG90 |
| Test Size | 813 x 1835 (36 x 72-1/4) | 1524 x 813 (60 x 36) |
| Design Pressure ASTM E330 | 2880 Pa (60.15 PSF) | 4320 Pa (90.23 PSF) |
| Air Infiltration(ASTM E283) | 0.2 L/s/m^2 (0.04 CFM/ft^2) 300 Pa (6.27 PSF) | 0.3 L/s/m^2 (0.05 CFM/ft^2) 300 Pa (6.27 PSF) |
| Water Resistance (ASTM E547 and E331) | 580 Pa (12.11 PSF) | 580 Pa (12.11 PSF) |
| Uniform Load Structural (ASTM 330) | 4320 Pa (90.23 PSF) | 6480 Pa (135.35 PSF) |
| U-Factor (NFRC | 100/200) | 0.35 - 0.51 | 0.35 - 0.51 |
| CRF (NFRC | 100/200) | ||
| Forced Entry Resistance ASTM 588 | Type B Grade 10 | Type B Grade 10 |
| Hopper | Simulated DH Fixed | |
|---|---|---|
| Frame Depth | 3.25" | 3.25" |
| Structural Rating | Class AW-PG60 | Class AW-PG75 |
| Test Size | 1524 x 965 (60 x 38) | 1524 x 2515 (60 x 99) |
| Design Pressure ASTM E330 | 2880 Pa (60.15 PSF) | 3600 Pa (75.19 PSF) |
| Air Infiltration(ASTM E283) | 0.05 L/s/m^2 (<0.01 CFM/ft^2) 300 Pa (6.27 PSF) | 0.05 L/s/m^2 (<0.01 CFM/ft^2) 300 Pa (6.27 PSF) |
| Water Resistance (ASTM E547 and E331) | 580 Pa (12.11 PSF) | 580 Pa (12.11 PSF) |
| Uniform Load Structural (ASTM 330) | 4320 Pa (90.23 PSF) | 5400 Pa (112.79 PSF) |
| U-Factor (NFRC | 100/200) | 0.35 - 0.51 | 0.26 - 0.40 |
| CRF (NFRC | 100/200) | ||
| Forced Entry Resistance ASTM 588 | Type B Grade 10 | Type D Grade 10 |
Glass
Low-E, Soft-Coat, Solar Control, Argon, Tempered, Obscure, Wire or Spandrel
Operators
Roto-op or Under-screen Push Bar hardware
Wrapping Systems
Mull Systems
Finishes
Special finishes and custom architectural finishes are available
Grids
Internal, External and Interior Grids
Architectural Steel Replica / Wood Replica
Details
General: All projecting windows are the thermally improved Series 700 as manufactured by Universal Window and Door. They include all necessary hardware and related items described and shown on the plans.
Material: Aluminum used is heavy commercial quality extruded aluminum 6063-T5 alloy with an internal polyurethane-filled structural thermal barrier. Frame and sash are designed for inside glazing using snap-in aluminum extruded bead.
Construction: All ventilator corners shall be mitered and reinforced with extruded keys that are crimped into place. All joints are sealed weather-tight. Corners of frame are closely fitted, telescoped, butt-jointed and tightly joined by mechanical means. Ventilator sections will be double weather-stripped, with flexible EDPM seals keyed into extruded grooves.
Glazing: At frames and vents, all glazing legs are 3/4″ high with an inside surface to secure glazing tape or extruded EPDM seals. Glazing beads are extruded, snap-in type, no less than .050″ and accommodate up to and including 1 1/8″ glass, panels or louvers.
Finish: Aluminum surfaces on the Series 700 are undercoated with a 5-stage chromate pre-treatment, then have an electrostatically applied, baked-on enamel finish conforming to AAMA 603.8 standards. Standard colors are white, black, bronze, green and beige. Special colors, architect-specified finishes and anodized finishes are available at an added cost.
Hardware: Universal’s ventilator windows incorporate two four-bar, heavy duty friction hinge assemblies securely fastened to the frame and vent members, operating in a track provided with an adjustable brass friction shoe that conceals when closed. Standard locking hardware consists of cam locking handles cast of white bronze, and secured with stainless steel fasteners.
Screens: The optional screens have extruded aluminum frames securely joined at the corners, and finish will match that of the window frame. Projected window frames feature a wicket door as standard. Screen cloth is 18 x 16 mesh fiberglass standard. WARNING: Insect screens are intended to provide reasonable insect control, and are not intended to provide for the retention of objects or persons from the interior.
Thermal Barrier: The thermal barrier consists of a two-part, chemically curing, high strength polyurethane casting resin. This barrier provides a continuous, uninterrupted break around the entire perimeter of the frame and vent, and it is not bridged by any metals, conductors or other materials.
Erection: Window frames must be installed straight, plumb, square, and level without springing or twisting, and securely fastened in place in accordance with manufacturer details and appropriate building codes. Windows are to be caulked with a suitable compound and using appropriate joint design to accomplish a thoroughly water-tight installation around the interior and exterior perimeter of the window frame and wall opening. Intersecting joints, mullions, and panning must be sealed to address field conditions.
